JSDA JD800 ROHS And CE Beauty Salon Equipment Nail Drill Electric Micro Motor

JSDA JD800 ROHS And CE Beauty Salon Equipment Nail Drill Electric Micro Motor

30,000RPM Powerful Electric Nail Drill Machine-Low Heat Low Noise Low Vibration

for grinding, cutting, carving, polishing even cuticle remover as well as dog cat pet nail grinder at home.

geart ventilation structure for heat dissipation,extremely quiet and smooth with slight vibration.

grip handpiece and bits set,the torque and twist lock chuck system help you replace grinding head you want easily.

"hand "or "foot "working mode ,you can use foot pedal to choose when to start with your nail job.

change the drill direction and speed manually through the direction button and the black speed control knob form 0 to 10.

Specification:

Model:JD800

Voltage:100V-110V/220V-240V

Cycle:50-60 HZ

Electric power:35W

Weight:1050g

Dimension:160*120*70mm

Color :Blue

Hand model:JDS36

Speed:0-30000 RPM.MAX

MAX. Torque:2.3N cm

Weight:160g

Package Includes:

1 * Electric Nail Drill Main control

1 * Hankpiece

1 * Handpiece Stand

1 * Foot Pedal (no speed control for the rotation)

1 * Drill bit Set(3 different bits)

1 * User Manual

Handpiece Directions/Working Mode/Grinding Speed-All Adjustable

How Ro Use?

Step 4: Choose "Hand" Mode or "Foot" Mode as you like, then adjust the speed knob to control the speed you like to get.

step 5: Control the direction button to change the grind direction FORWARD or REVERSE.

Step 6: if you think everything is ready, then you can start your nail job.

"HAND" or "FOOT" for Changing Working Mode

Using Tips:

Don't let the nail drill keep working for a long time, because you may feel hot even though great ventilation structure.

Please place drills on the it's stand when not in use, and store it in a dry location.

"FWD" or "REV" for Changing Handpiece Directions

How To Use?

Step 1: Select the grinding head bit you want and replace it into the bottom of collet.

Step 2: Connect the handpiece and pedal to the machine.

Step 3: Plug in and press the power button to turn on/off.

Handpiece Feature:

Speed 0-30,000 RPM(MAX)

Fit for 3/32" Drill Bits

Max.Torque 2.0Ncm

Weight:0.35Lb

Handpiece Operation:

1.holding handpiece in hand, trun Set Ring fully(two pause) toward "R" direction.

2.take out the bar

3.put the bit you wanted into the bottom of collet.

4.return the Set Ring to "S" direction, to secure collet and lock bit tightly.

Contact Information:
Live Support: Chat with us online
Email: service.alandental@gmail.com
If you have any problem, please do not hesitate to contact us.

Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.

How to Buy from Alandental?