Dental High Temperature and Pressure Steam Cleaner DS300-4B 1400W

 

Steam cleaning is to inject clean water into the heating pressure pot first, and then be heated to saturated steam under the condition of complete sealing. During the heating process, the pressure in the pot will gradually increase. When the pressure in the steam pressure pot reaches more than 3bar, the steam engine will enter the working state. The temperature of the injected saturated steam is up to 120 ℃ or above. The high temperature and high pressure of saturated steam can be used to clean the blood debris and other attachments on the surface of the washer, and vaporize it. At the same time, it can clean the small gaps and holes, peel off and remove blood stains and residues, so as to achieve the requirements of high efficiency, water saving, cleaning and drying.

 

1. High quality cleaning is the premise of sterilization. The medical steam cleaning machine is especially suitable for cleaning all kinds of instruments with complex design, and does not damage the surface coating of the instruments. Through steam cleaning, the instruments can be more easily sterilized, and the service life of the instruments can be extended.

2. The medical steam cleaning machine can produce steam with high quality pressure to ensure the contact between the steam and all sides of the object to be cleaned. The steam cleaning pressure can quickly reach all parts, so as to remove the pollution of each dead corner and instantly restore the natural color of various materials.

3. The use of steam cleaning machine, steam instead of water as cleaning medium, to ensure environmental cleaning effect. It has high pressure and high temperature cleaning functions that conventional cleaning does not have. It can quickly peel off all kinds of attachments such as oil stains, blood stains, proteins and so on.

 

Scope of recommended use

Commercial / industrial uses

Dental and operating room equipment / Jewelry production

Tattoo tool / Automobile / Air Parts

Gasoline nozzles Archaeology / Heritage research

Needle for Subcutaueous injection / Laboratory Glass Products and Supplies

Contact leuses and other optical conmponents / Metal or fiber filters

Mold, mesh, hole, circuit board / Production line cleaning

Watches and glasses, sunglasses

Metal items: cutlery, old coins, micro-chapters, valves, machine bores, small metal pieces, etc.

Archaeology, recovery of antique

 

Model:DS300-4B

Dimension:35*24*33cm

Voltage:220V/110V, 50Hz/60Hz

Heating power:1400W

Steam pressure:4 Bar

Boiler capacity:3L

Preheating time:Approx 10 minutes

Outer case:304 stainless steel

Injection temperature:Approx 120 ℃

Packing size:60*35*48cm

Packing weight:14kg

Working mode:Handle steam switch control