The type of repair that you need will depend on the type of dental handpiece that you have. Most dental offices use high speed handpieces more often than low speed, yet both are useful. You should expect to need your high speed handpiece maintained more often due to the wear and tear on the bearings. The type of maintenance that you perform on your handpiece will also depend on the intricate parts involved on each type of tool.

Traditional handpieces use an air-driven turbine to facilitate the rotators. These have a lighter weight and a skinny design, making them easy to work with. While turbine handpieces have many advantages, they can also cause higher levels of “noise” as the handpiece ages and the bearings wear down.

Electrical handpieces operate at both high and low speeds. This makes them versatile for all kinds of procedures. Instead of bearings, this handpiece has gears instead of bearings. These handpieces are quieter due to the fact that air is not flowing through them for power.

Electric handpiece repair doesn’t require a complete rebuilding of the tool each and every time. Most times, the parts that are causing the issues are inspected and replaced if needed.

If your dental handpiece is vibrating more than usual, it could be a sign that there’s a problem with the handpiece itself. The simple solution is that you may simply just need to flush the handpiece out with oil as directed by your manufacturer. Simple lubrication can work wonders for your handpiece. Alternatively, the bearings inside of the tool could be loose.

Sometimes, factory parts are required for a repair, other times, bearings of higher ratings can be used, depending on the state of the tool itself. Each brand and variation of handpiece has a different number of bearings and gears. That’s why you need to send your most important tool to the right repair company to ensure a safe and effective repair.