Dental practitioners are reporting high success rates, and many dentists are gaining the knowledge and experience to integrate implants into their dental practice successfully. It is important for patients to know that an evaluation for the replacement of most missing teeth should include an implant site and cost evaluation.

Dental root form implants are manufactured from a highgrade titanium alloy, the surface of which consists of  a micro layer of titanium oxide. The implant surface can also be treated by plasma spraying, acid etching, sandblasting or coated with HA. The removal of  plaque  and  calculus  deposits  from  these implant surfaces with dental instruments designed originally for cleaning natural tooth surfaces can result in major alterations to the delicate titanium oxide layer. Altering the surface topography by roughening the surface may enhance  calculus  and  bacterial  plaque accumulation.

Resulting scratches, cuts or gouges may also reduce the corrosion resistancy of titanium, and corrosion and mechanical debris can accumulate in the surrounding tissue. The aim of procedures for debriding dental implants should be to remove microbial and other soft deposits, without altering the implant surface, and thereby adversely affect biocompatibility. Increased surface roughness can lead to an increase in bacterial accumulation and resultant soft tissue inflammation. Because of the critical nature of the implant/soft tissue relationship, metal ultrasonic scaler tips, hand scalers or curettes should not be used as they have been shown to significantly alter the titanium surface.

Dental implants treatment by dental implant machine is most commonly used to permanently replace a missing tooth and is performed by a cosmetic dentist, many would think that one has it just for an aesthetic appeal.  This isn’t always the case, even though the patient may not be aware of the dental health improvement that an implant treatment has, it does have it.

When a person is missing a tooth, the gap that’s left in their mouth enables the rest of the teeth to shift and move which can cause misalignment, a poor bite, and effect their eating habits.  The bone, which will weaken more quickly, where the tooth is missing if the gap isn’t filled.   This can cause the other teeth to become loose and fall out.

Dental Laboratories and dental technicians( dental lab equipment ) often work behind the scene with the dentist and/or the specialist and are an integral part of the treatment process for patients. A thorough understanding of patients’ anatomical limitations during treatment planning is essential, as is recommending and implementing the appropriate impression/transfer techniques, abutment design, and restoration design.