Tag Archives: Dental Implant

The Main Steps of Dental Implant

The primary use of dental implants is to support dental prosthetics. Modern dental implants make use of osseointegration, the biologic process where bone fuses tightly to the surface of specific materials such as titanium and some ceramics. The integration of implant and bone can support physical loads for decades without failure.

For individual tooth replacement, an implant abutment is first secured to the implant with an abutment screw. A crown (the dental prosthesis) is then connected to the abutment with dental cement, a small screw, or fused with the abutment as one piece during fabrication. Dental implants, in the same way, can also be used to retain a multiple tooth dental prosthesis either in the form of a fixed bridge or removable dentures.

An implant supported bridge (or fixed denture) is a group of teeth secured to dental implants so the prosthetic cannot be removed by the user. Bridges typically connect to more than one implant and may also connect to teeth as anchor points. Typically the number of teeth will outnumber the anchor points with the teeth that are directly over the implants referred to as abutments and those between abutments referred to as pontics. Implant supported bridges attach to implant abutments in the same way as a single tooth implant replacement by dental implant machine. A fixed bridge may replace as few as two teeth (also known as a fixed partial denture) and may extend to replace an entire arch of teeth (also known as a fixed full denture). In both cases, the prosthesis is said to be fixed because it cannot be removed by the denture wearer.

Dental implant treatment generally takes several months and follows a three-step process.

Your Smile approved dentist places the implant into the jaw then inserts a screw to prevent debris from entering. It will take 3 to 6 months for the implant to fuse with the jawbone, during which time the gum is secured over the implant.

Upon returning to the dentist, the implant is uncovered and an extension called a post is attached. Once the gum tissue has healed around the post, the implant and post act as the foundation for the new tooth.

Finally, the dentist makes a crown that best suits your natural teeth, considering factors including size, shape and colour.

If cared for correctly, your dental implant should last a lifetime. The artificial replacement tooth attached, however, be it a dental crown, bridge or denture, does have a lifespan, which is generally between 5-15 years depending on how well it is cared for. Once completed, the crown is attached to the implant post and you can enjoy your beautiful new smile!

The Best Option for Your Teeth–Dental Implant Treatment

Up until fairly recently, most dentists relied on procedures such as root canals, bridges and the use of dentures as the best methods of fixing lost or broken teeth. While these methods have always been effective in some cases, for many people they did not provide a viable, long-term solution.

Root canals and bridges fail over time and dentures have proven to be uncomfortable and cumbersome to wear and use for many people. It is only through the development of methods, tools and technology that a better way to replace damaged or lost teeth has come along. The use of dental crowns and dental implants has become much more commonplace today and provide you with the best option for your teeth. Here are a few important facts you should know about dental implants.

Your dentist can evaluate your case and tell you if you are a candidate for dental implants. Structurally, a dental implant is a titanium-based cylinder that replaces the missing tooth root. After a period of time, other parts are placed on the implant to enable your dentist to eventually place a crown (cap) on the implant. Implants can also be used to support full or partial dentures, dramatically improving denture retention and stability. Your dentist may choose to perform dental X-rays by portable x-ray machine in order to check for bone density as part of preparing you for dental implants, which require an adequate density in order to support the implants.

Since a dental implants treatment by dental implant machine is most commonly used to permanently replace a missing tooth and is performed by a cosmetic dentist, many would think that one has it just for an aesthetic appeal. This isn’t always the case, even though the patient may not be aware of the dental health improvement that an implant treatment has, it does have it.

When a person is missing a tooth, the gap that’s left in their mouth enables the rest of the teeth to shift and move which can cause misalignment, a poor bite, and effect their eating habits. The bone, which will weaken more quickly, where the tooth is missing if the gap isn’t filled. This can cause the other teeth to become loose and fall out.

Having dental implants provides a wide range of benefits to everyone who uses them. These dental implants are an indecent into a life time of looking and feeling better, being healthier, and feeling comfortable and confident with your smile. Getting dental implants has become the best and most effective way to improve the lives of many people and giving them a glorious smile.

The Use of Air Polishing in Dental Implants

In most currently available units, the water stream emits through a separate nozzle that may be concentric to that of the powderladen air stream nozzle. The resulting buildup of crystalline anhydrous sodium bicarbonate deposits in the lumen of the air/powder nozzle results in clogging.

More recent technology produces a slurry by introducing the water stream into the powder-laden air stream, within the spray head at a critical moment, to produce a fully homogeneous stream that is emitted from a single nozzle. This stream technology configuration has not only been shown to prevent nozzle clogging by preventing the buildup of deposits, but also results in a much more efficient cleaning action because the slurry is formed prior to emission. Air polishing devices( like dental air polisher ) were originally designed to be standalone tabletop units. They have been considered to be the equipment of choice for the hygiene department, sometimes being combined with ultrasonic scaling devices.

Dental root form implants are manufactured from a highgrade titanium alloy, the surface of which consists of a micro layer of titanium oxide. The implant surface can also be treated by plasma spraying, acid etching, sandblasting or coated with HA. The removal of plaque and calculus deposits from these implant surfaces with Dental Instruments designed originally for cleaning natural tooth surfaces can result in major alterations to the delicate titanium oxide layer. Altering the surface topography by roughening the surface may enhance calculus and bacterial plaque accumulation.

Resulting scratches, cuts or gouges may also reduce the corrosion resistancy of titanium, and corrosion and mechanical debris can accumulate in the surrounding tissue. The aim of procedures for debriding dental implants by dental implant machine should be to remove microbial and other soft deposits, without altering the implant surface, and thereby adversely affect biocompatibility. Increased surface roughness can lead to an increase in bacterial accumulation and resultant soft tissue inflammation. Because of the critical nature of the implant/soft tissue relationship, metal ultrasonic scaler tips, hand scalers or curettes should not be used as they have been shown to significantly alter the titanium surface.

Current methods for professional cleaning of implant or titanium transmucosal elements include the set of plastic ultrasonic tips or hand instruments followed by the prophy cup polishing method or various types of floss and buffing strips. The design of the permanently cemented super structure often does not allow adequate access for the prophy cup, especially in interproximal areas, and plastic instruments are not very efficient for the removal of plaque or mineralized deposits. In addition, the prophy cup and paste method may leave residual paste at the implant/soft tissue interface area.

Debunking Common Dental Implant Myths

A dental implants treatment is for individuals who have a missing tooth or teeth. They are also for those who need support for a bridge or a denture. The most common reason though is to replace a missing tooth or teeth, permanently. Dental implants are artificial teeth that are surgically implanted in the mouth in place of missing teeth, teeth that need to be removed due to decay or irreparable disfigurement.

While dental implants are impervious to tooth decay, you’re still prone to gum disease. That’s why you need to brush, floss and visit your dentist regularly. There are some additional steps that you should take keep your new teeth just as dazzling as your original pearly whites.

See your dental specialist twice a year. Not only will she thoroughly clean your implants and remove plaque, but a cosmetic dentist in New Jersey can evaluate if your implants need adjustments.

Getting dental implants does not reduce or eliminate your risk for oral disease. In fact, as you age developing root decay and mouth cancers naturally increase, no matter how often you brush and floss. That’s why it’s crucial to get regular checkups. When you visit your oral hygienist in New Jersey or surrounding location for cleanings and dental implant maintenance, he will also evaluate your mouth for these potential health problems:

Uneven jaw bone caused by tooth loss (since you have implants, you’re at risk for this)
Tissue inflammation – an oral problem people with dental work are at higher risk for Attrition, a structural problem caused by forces from other teeth.

Regardless of whether you have all your original teeth or dental implants, everyone should practice proper oral hygiene. The great news is that by following these simple recommendations, your dental implants can last for over four decades.

Since a dental implants treatment is most commonly used to permanently replace a missing tooth and is performed by a cosmetic dentist, many would think that one has it just for an aesthetic appeal. This isn’t always the case, even though the patient may not be aware of the dental health improvement that an implant treatment has, it does have it.

When a person is missing a tooth, the gap that’s left in their mouth enables the rest of the teeth to shift and move which can cause misalignment, a poor bite, and effect their eating habits. The bone, which will weaken more quickly, where the tooth is missing if the gap isn’t filled. This can cause the other teeth to become loose and fall out.

For more information, please visit: https://www.alandental.com/category-80-b0-Root-Canal-Endodontic.html

Q. Why can’t smokers undergo certain cosmetic dentistry procedures?

A. Smoking is a leading cause of tooth loss. Smokers also have an increased risk for periodontal disease (gum disease), leukoplakia, loss of bone structure, inflammation of the salivary gland, and development of lung, throat, or oral cancer. Smokers therefore face an additional set of considerations when exploring cosmetic dentistry treatment.

One restriction for smokers involves dental implants. Smoking increases the risk that a dental implant will fail to integrate with bone tissue (osseointegration). Smoking also affects gum health, and unhealthy gums can lead to dental implant failure. If you smoke, you need to quit before having an implant.

Another restriction involves teeth whitening. If you whiten your teeth but continue to smoke, the whitening effect will not last as long, because smoking stains the teeth.

Q. May I choose to be sedated during cosmetic dentistry procedures?

A. Yes. The level of sedation necessary for cosmetic dentistry procedures depends on several factors, including:

Your health and medical history.
The procedure being performed.
Your dentist’s familiarity with sedation modalities.

Most people do not require a high level of sedation during cosmetic dental procedures.

Q. Are dental implants suitable for children?

A. Dentists indicate that implants cannot be considered until bone growth has completed. This typically occurs during adolescence, but may vary from one child to the next. Implants placed prior to bone growth completion may shift out of place and cause severe problems. If a child loses a tooth before bone growth has completed, an orthodontic device called a “space maintainer” may be used to prevent an abnormal growth of surrounding teeth. Once bone growth has completed, the space maintainer can be removed and the missing tooth restored using an implant or bridge.

Q. Are veneers my only option if I want a smile makeover?

A. No. Your cosmetic dentist will determine the cosmetic dentistry procedures that would be the best for you. The dentist’s suggestions will be based on your desires and a thorough examination to determine the condition of your teeth and what problems, if any, may require dental treatment. Therefore, your smile makeover could involve teeth whitening, crowns, composite bonding, gingival sculpting, inlays and onlays or any other combination of cosmetic dental procedures that your dentist determines is right for your cosmetic treatment plan.

Q. Does led teeth whitening work for everyone?

A. No. In cases involving severe discoloration, teeth whitening may not result in a bright, white smile. Individuals with severe tooth discoloration should consider other options, such as porcelain veneers or composite bonding.

For more information, please visit: https://www.alandental.com/category-55-b0-Portable-X-ray-Machine.html

What Should You Pay Attention on the Procedure of Cosmetic Dentistry

Although dentures are not considered a cosmetic dentistry procedure, they provide a cosmetic benefit for people who have lost all or some of their teeth. People who are missing only certain teeth, or rows of teeth, may be better served by a dental bridge or dental implants. It is best to have your situation evaluated by a dental professional in order to establish candidacy for any of these procedures.

The level of sedation necessary for cosmetic dentistry procedures depends on several factors, including:

Your health and medical history.
The procedure being performed.
Your dentist’s familiarity with sedation modalities.

Most people do not require a high level of sedation during cosmetic dental procedures.

Smoking is a leading cause of tooth loss. Smokers also have an increased risk for periodontal disease (gum disease), leukoplakia, loss of bone structure, inflammation of the salivary gland, and development of lung, throat, or oral cancer. Smokers therefore face an additional set of considerations when exploring cosmetic dentistry treatment.

One restriction for smokers involves dental implants. Smoking increases the risk that a dental implant will fail to integrate with bone tissue (osseointegration). Smoking also affects gum health, and unhealthy gums can lead to dental implant failure. If you smoke, you need to quit before having an implant.

Another restriction involves led teeth whitening. If you whiten your teeth but continue to smoke, the whitening effect will not last as long, because smoking stains the teeth.

some children and adolescents may have severely discolored teeth as a result of taking certain medications. Or, the front teeth may have been fractured due to an accident or sports injury and require composite bonding or veneers. In other instances, there still may be slight gaps or spaces between the teeth even after orthodontics, so perhaps composite bonding would enhance the look of the smile.

If your child or teenager is concerned about the appearance of his or her smile, make an appointment to see your dentist. He or she will suggest the most appropriate course of action based on your child’s age, oral condition and desires, as well as possibly refer you to a cosmetic dentist for consultation.

Dental Implants can be an Effective Tooth Replacement Option

Dental implants are the best way to restore missing teeth. Typically, dental implants are made out of titanium, a very strong metal that is biocompatible with bone and the same material that is used in hip and knee replacements. As a result, it makes a beneficial anchor for a crown, bridge or denture. Here are some ways that implants can be used to restore your smile and your ability to chew the foods that you want:

Replace Single Teeth – An implant can be used to replace a single missing tooth without affecting the neighbouring teeth in the way bridges and dentures do. You can brush and floss around an implant just like your natural teeth. If the conditions are right, an implant can even be placed at the same visit that a hopeless tooth is extracted.(Dental Implant Machine)
Replace Multiple Teeth – If you are missing several teeth in a row, two or more implants can be placed in order to support a bridge and eliminate the need for a denture that feels bulky and moves around.
Eliminate Unsightly Denture Wires – If you have a partial denture and hate those metal wires that wrap around your natural teeth, implants can be used to anchor the partial denture and prevent it from falling out. Imagine how confident you will feel when you can smile and not have to worry about others seeing your metal clasps.
Secure a Full Denture – Dental implants can be used to retain full lower dentures without the need for messy pastes and glues. Full upper dentures can be kept in place using dental implants without covering up your palate. Patients who are “gaggers” can greatly benefit from this and restore their quality of life.

There are many advantages associated with dental implants. If you want to know more, please don’t hesitate to reach out to us at Georgian Shores Dental Centre.